Frame (Frame or Yoke) A frame that holds the axis of the magnet pole and the machine cover. It also provides a path for magnetic fields to provide a complete passage of the magnetic lines. The chassis is usually made of cast iron or steel. Plates that are bent in a way, cylinder, and then welded to hold the joints together. In addition, for large generators, the machine frame is designed to be divided into two parts for ease of transport, with one part being the upper part and the lower part, which can be assembled Machine with knots and screws.
Magnetic pole and Pole Shoes and the tip of the magnetic pole that The rounded arch of the armature axis (Pole Shoes) is made from laminated steel sheets. The pump is the axis of the magnetic pole and Pole Shoes to be assembled into the same sheet by protruding from both edges in front of the magnetic pole. which will look curved The round shape of the armature axis is Pole Shoes Pole and Pole Shoe.
A magnetic field coil is a field coil wound around the core of all primary magnetic poles. by the field windings are insulated With a material such as cotton tape, it is soaked with varnish and dried, then attached to the magnetic pole core. Must be connected to the north and south poles alternately or adjacent poles must be poles of different types.
Commuter The part that serves to change the AC voltage in Armature winding to DC voltage In addition, commuters do function of arranging electricity The commutators are made of copper rods, each of which has a wedge-shaped reamer. for ease of assembly in a cylindrical shape But there will be a sheet of mica in the middle between each tooth. with the size of the working power of the generator, including the voltage between the SECommu The stator is adjacent to the internal structure of the commutator.
---> Generators Product and Work <---
No comments:
Post a Comment